1. Wear of mesh belt

In modern industrial production, high temperature mesh belts play an important role as transmission belts. However, like other mechanical equipment, mesh belts will be worn out during long-term use, which may have adverse effects on their performance, efficiency and service life. Therefore, regular inspection and maintenance are essential for the normal operation of high temperature mesh belts.

2. The following are common reasons for belt wear

● Friction:

During operation, the high-temperature mesh belt will generate friction with the material or equipment. Long-term friction will cause wear and tear on the surface of the mesh belt, thus affecting its transmission efficiency and life.

● Corrosion: 
When high-temperature mesh belts are exposed to humid air or come into contact with environmental factors such as chemicals, they are prone to corrosion, resulting in rust and oxidation on the surface of the mesh belts, further accelerating their wear.

● Misalignment:
Improper adjustment of the machine or errors during installation may cause inappropriate clearance between the high-temperature mesh belt and other components, causing misalignment and distortion of the mesh belt, increasing friction and wear.

● Other reasons:
a. Overload: When the material exceeds the carrying capacity, it may cause deformation and breakage of the mesh belt.
b. Material: If the selected high-temperature mesh belt material is not compliant, it will cause the mesh belt to break and affect the service life of the mesh belt.
c. Operation: Check whether the workers are operating strictly in accordance with the regulations.

3. Maintenance measures for mesh belt

● Regular cleaning:
Clean the high-temperature mesh belt regularly to remove dirt and impurities on the surface. Excessive accumulation of these stains and debris can cause the metal mesh belt to jam, and regular cleaning is required to reduce friction and corrosion.

● Installation and debugging:
When installing the mesh belt, make sure it is properly tight. Correct mesh belt position adjustment can ensure its normal operation while avoiding potential problems caused by over-tightening or over-loosening.

● Pay attention to the operating conditions
Always pay attention to the operating conditions of the equipment. If the high-temperature mesh belt is found to be deviating, take immediate action to adjust the deviation correction device to ensure the normal operation of the equipment.